來源：http://www.fuzore.com 發布時間：2017-12-29 14:15:34
1. The bonding performance is stable and durable.
鋁質瓦楞板采用AL3003H16-H18材料，面板厚度為0.7mm~1 .0mm,背板厚度為0.5 - 1mm(與鋁質蜂窩板相同），芯板采用AL3003H16-H18,材料厚度為0.2mm、0.25mm，0.3mm,是水波紋型，與面板背板粘結面為弧型，增大了粘結強度，利用熱硬化性樹脂粘合劑具有金屬板的粘合力，在先進的全自動化生產設備上生產，確保粘結性能穩定牢固耐久與建筑同壽命。
Aluminum corrugated plate made of AL3003H16-H18 material, the panel thickness is 0.7mm~1.0mm, backplane thickness of 0.5 - 1mm (with the same aluminum honeycomb board), using the AL3003H16-H18 core board, material thickness was 0.2mm, 0.25mm, 0.3mm, water ripples, and the panel back bonding surface of arc, increasing the bonding strength, using heat hardening resin adhesive with excellent adhesion to metal plates, in the production of advanced automatic production equipment, ensure durable and stable performance of building bond with life.
2. Energy conservation and environmental protection:
The core plate of the aluminum corrugated board is a water wave pattern. The air channel is formed between the panel and the back plate. It is a hollow plate system. It is the best product of heat insulation and heat preservation. Under the action of solar radiation, the air in the channel is heated up to take away the heat and has the heat insulation performance. In cold areas, the sealing of the upper and lower end of the corrugated channel, the daytime irradiation under the sunlight, the storage of heat energy to reduce the loss of indoor heating heat, and has the thermal insulation performance. The remainder in the project can be recovered 100%, and the environmental protection is no pollution.
3, sound insulation and noise reduction:
Because the core plate is a corrugated arc, it reflects the surface of the sound wave and eliminates the sound wave coupling between the panel and the back plate, and improves the sound insulation performance of more than 35dB.
4. Ultra high evenness:
Aluminum corrugated board is not suitable for large plate or large height curtain wall engineering because the thickness of aluminum plate is 0.7--1.0mm and the bearing capacity is small after folding. Because the linear expansion coefficient is 2.35x10-5, the aluminum sheet has large shrinkage and thermal expansion deformation. After 1-2 years, the concave and convex deformation on the surface of the aluminum plate affects the artistry of the fa ade. The flatness of the outer surface of the honeycomb plate is better, but it is not suitable to be used by the project. The tensile and compressive strength of aluminum corrugated board, 180 degree peel strength (see the report) is higher than that of honeycomb panel, so it has super high surface smoothness, stability and durability, and the same life of building.
5. Light weight and economical:
Aluminum corrugated board thickness of 6mm, the proportion of 4.3kg/ square meters due to surface heavy load is small, and the structure of bearing keel can be reduced, more economical.
6, Yi Qingxi, corrosion resistance, antifouling ability, durable discoloration.
7. The processing and installation are simple and convenient:
Easy to process: cutting, drilling, bending, can be made into flat plate, arc plate. The edge ribs and reinforcing help can be connected with the pull rivet, which is simple and firm.
Easy installation construction: the structure of fixed distance pressing, hanging, seams and closed seams can be adopted to ensure smooth surface, safety and durability, and more architectural art.
The excellent content of this paper is written by the aluminum coil manufacturer. Our company adheres to the idea of win-win cooperation with sincerity and cooperation, and provides you with perfect service. Welcome to click in: http://www.fuzore.com.