鋁板生產廠家

您的位置:首頁 > 新聞資訊 >

鋁卷生產廠家:鋁板的深加工選材是非常重要的

來源:http://www.fuzore.com  發布時間:2019-10-29 16:25:56  

  鋁板的深加工要注意板材的選擇,鋁板的硬度比較高,很容易破碎,所以在原材料這一關一定要關,一定要選擇質量好的鋁板。購買鋁板時,需要查看其品牌和狀態,然后根據圖紙要求選擇鋁板的品牌。
  In the deep processing of aluminum plate, attention should be paid to the selection of plate. The hardness of aluminum plate is relatively high and it is easy to be broken. Therefore, the raw material must be closed and the aluminum plate with good quality must be selected. When purchasing aluminum plate, you need to check its brand and status, and then select the brand of aluminum plate according to the drawing requirements.
  然后對鋁板進行深加工,還要注意對鋁板運輸和加工過程的保護工作,具體要求是嚴格按照客戶的要求進行加工,減少因運輸過程中零件的損壞。另外,在鋁板加工過程中一定要注意鋁板零件的位置,一定要放在指定的位置,輕拿輕放十分方便。
  Then, the aluminum plate shall be deeply processed, and attention shall be paid to the protection of aluminum plate transportation and processing process. The specific requirements are to process in strict accordance with the customer's requirements, so as to reduce the damage of parts during transportation. In addition, in the process of aluminum plate processing, it is necessary to pay attention to the position of aluminum plate parts, which must be placed at the designated position. It is very convenient to handle with care.
  其次,鋁板的深加工,但也注意表面沖孔部分問題,在鋁板孔和沖壓前需要調整上、下模的間隙,因為相對于普通冷軋鋼板,鋁板之間的間隙應該減少,以避免沖壓切口的毛刺太大。
  Second, the deep processing of aluminum plate, but also pay attention to the surface punching part of the problem, in the aluminum plate hole and before stamping need to adjust the upper and lower die clearance, because compared with the ordinary cold-rolled steel plate, the clearance between aluminum plates should be reduced, in order to avoid the burr of stamping cut is too large.

鋁卷生產廠家
  鋁板生產廠家熔點低,鑄造性能好。鋁的力學性能與純度有很大關系。工業鋁板的強度較低,但由鋁和部分合金元素組成的鋁合金不僅在一定程度上保留了鋁的固有特性,而且經過深加工后硬度和強度有了明顯提高。某些鋁合金用作結構材料時,其強度比一般結構鋼高。有些鋁合金作為模具材料,其使用壽命可以超過一般的模具鋼。鋁及多種鋁合金具有良好的延展性,可用于各種塑料加工。任何一種鋁合金的切削性能都比鋼和純鋁的切削性能好,但各種變形鋁合金和鑄造合金的切削性能會有很大的不同。鋁和鋁合金是更容易成形的金屬材料,但鋁合金的允許形狀受其化學成分、等級和熱處理的影響。由于鋁合金的機械強度和加工硬化率較低,鋁合金的成形性能與其他金屬不同。
  Aluminum plate manufacturers have low melting point and good casting performance. The mechanical properties of aluminum are closely related to its purity. The strength of industrial aluminum plate is low, but the aluminum alloy composed of aluminum and some alloy elements not only retains the inherent characteristics of aluminum to a certain extent, but also improves the hardness and strength after deep processing. When some aluminum alloys are used as structural materials, their strength is higher than that of general structural steel. Some aluminum alloy as mold material, its service life can exceed the general mold steel. Aluminum and a variety of aluminum alloys have good ductility, which can be used in various plastic processing. The cutting performance of any kind of aluminum alloy is better than that of steel and pure aluminum, but the cutting performance of all kinds of deformed aluminum alloy and cast alloy will be very different. Aluminum and its alloy are the most easily formed metal materials, but the allowable shape of aluminum alloy is affected by its chemical composition, grade and heat treatment. Due to the low mechanical strength and work hardening rate of aluminum alloy, the formability of aluminum alloy is different from other metals.
  綜上所述,工業鋁板生產企業的工業鋁板主要用于以下行業:建筑行業、集裝箱包裝、交通運輸、電力行業、食品行業、機械設備、耐用消費品行業等類別的使用。在過去的20年里,鋁在建筑、汽車和包裝上的使用已經成為發達國家鋁的三大主要用途。想要了解更多內容,歡迎訪問鋁卷生產廠家網站:http://www.fuzore.comTo sum up, the industrial aluminum plates of industrial aluminum plate manufacturers are mainly used in the following industries: construction industry, container packaging, transportation, power industry, food industry, mechanical equipment, durable consumer goods industry, etc. In the past 20 years, the use of aluminum in construction, automobile and packaging has become the three major uses of aluminum in developed countries. For more information, please visit the website of aluminum coil manufacturer: http://www.fuzore.com

国产欧美日韩精品a在线观看_欧美人与兽_被公侵犯玩弄漂亮人妻